W: 400 ÷ 420. Farine de Type 55 obtenue à partir des meilleurs blés nord-américains, pour des pizzaiolos plus exigeants. Elle est idéale pour des pétrissage avec une méthode traditionnelle à longue fermentation (dépassant 24 heures) et une conservation jusqu’ à 6 jours en chambre froide.
25KG -10KG
Protech AC-P
Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events.
Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general.
For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks.
On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. .
DILUTION (by volume with drinking water)
BRUSH
1st COAT: 15% a crossed coat or two coats 12-24 hours apart
2nd COAT: 10%.
ROLLER
1st COAT: 10%
2nd COAT: 10%.
SPRAY (through specific equipment)
1st COAT: 15/25%
2nd COAT: 15/25%.
To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product.
From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted.
Pail 14 l
SOLVENT PAINT of COSMOCHROME is a high quality undercoat for concrete surfaces (concrete columns, concrete floors, walls, ceramic tile roofs etc). It is highly durable against extreme weather conditions and atmosphere pollution. It has strong adhesion, great covering power and extreme hardness
PACKAGE:0,75 LT, 10 LT, 2,5 LT
COLOR:Black, Cypress Green
Waterbased pigmented primer for all types of masonry substrates. Suitable even on fresh concrete and mortar.
Features
Excellent adhesion to concrete.
Excellent alkali and efflorescence resistance.
Excellent water resistance.
Good UV resistance.
Interior and exterior.
Eco friendly.
Solvents free.
Ready for use, do not dilute.
COMPOSITION ET ASPECT
Blanche.
CONDITIONNEMENTS
Cartouche de 290 ml.
STOCKAGE
12 mois à l’abri du froid et des fortes chaleurs en emballage d’origine non entamé.
CARACTÉRISTIQUES TECHNIQUES
• Matières premières : MS Polymère
• Système de durcissement : par l’humidité
• V itesse de durcissement : 2,5 à 3 mm par 24 h. (à T=23°C et 50 % HR)
• Formation de peau : 10 à 15 minutes (à T = 23°C et 50 % HR)
PRÉCAUTIONS D’EMPLOI
Ne pas travailler en dessous de +5°C.
Conserver hors de portée des enfants.
Contient : N-(3-(trimethoxysilyl)propyl)ethylenediamine - Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacaat - Methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacaat.
Peut déclencher une réaction allergique.
PRÉPARATION DES SUPPORTS
Les supports doivent être propres, secs, dépoussiérés et dégraissés.
APPLICATION
Appliquer la colle en extrudant un cordon ou des points sur le support ou l’élément à coller.
Assembler les matériaux le plus vite possible : maxi 10 minutes.
• Poids spécifique...
Es verkauft automatische Tücher für die zuverlässige Reinigung von Autos und es funktioniert rund um die Uhr.
Es funktioniert mit Münzen und gibt dem Benutzer das Produkt aus dem Produktreservoir
von Auto-Trockentüchern gleichbleibender Qualität.
Nennspannung:12 V/DC
IP-Schutzklasse:IP67
Arbeitstemperatur:15 °C, +40 °C
Länge x Breite x Tiefe:164 x 94 x 32 CM
Art.-Nr.:0612092Y
VE:1
Auto Range:Nein
Digitale Sensorreduzierung:DNR
L.A. Länge:20/40/80
Zahlungsmodul:Münze, Token
Facilitates combing and subsequent shaping of the hairstyle
Contributes to the restoration of the damaged hair structure
Regenerates, strengthens and restores hair density
Reduces brittleness and strengthens split ends
Leaves hair soft, shiny, hydrated and healthy looking
Ideal for everyday use and all hair types
Protects against the effects of UV rays and external aggressors
No parabens / no mineral oils / no dyes
Recyclable packaging
Description : Introducing an exquisite hair conditioner designed to care for and nourish your locks. Indulge your senses with an elegant experience provided by our artfully blended formula combining the finest natural ingredients with modern technology.
Going beyond the limits of the usual, the conditioner restores the damaged structure of the hair. With each application, it actively regenerates, strengthens and restores the density of your hair, giving it backs
Code:19129
PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions
PACKAGE:0,17 LT, 0,375 LT, 0,75 LT, 10 LT, 3 LT
COLOR:Black, Blue
Smooth finishing Hydro-Pliolite® revetment for decoration and protection of all types of surfaces of brickwork in general, combining a high grade of waterproofing with an excellent permeability to water vapour giving a high long life and durability. Paint with protection against fungi and algae.
2component epoxy paint for the protection of concrete floors, metal structures, etc. Does not contain solvents (100% solids).
Features
Excellent adhesion.
Great penetration power.
Good adhesion in wet substrate with high percentage of humidity.
Good capacity for reaction at low temperatures and high percentage of humidity.
Indoor and outdoor use.
Acrylic solvent base paint with good adherence, high mechanical resistance and anti slip properties. Paint for horizontal marking of floors of concrete, cement, asphalt, etc. for parking lots and areas, sidewalks, crosswalk, etc.
Colours: White, Yellow (Ral 1003), Red (Ral 2002), Blue (Ral 5015).
TECHNICAL DEFINITION
CE 78 PERFECT’LIGHT is a lightweight ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape.
COMPOSITION AND APPEARANCE
Resin, water, calcium carbonate, lightweight fillers, preservation agent and various adjuvants.
The paste is white.
COVERINGS.
Plasterboard primer.
Smoothing filler.
REFERENCE DOCUMENTS
• CE marking
• DTU 25.41 and DTU 25.42
• NF EN 13963
• DoP
PACK SIZE
20 kg buckets on covered pallet.
STORAGE
12 months in original unopened packaging away from frost and high temperatures.
APPLICATION
Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.).
Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape
Then add a finishing coat, allow to dry and finish to hide the tape.
Also hide the screw heads.
For projecting vertical edges, use reinforced tape.